Trackball Control Unit; Dvd Drive; How To Turn The Power On Or Off - Furuno FMD-3100 Operator's Manual

1.3

Trackball Control Unit

The Trackball Control Unit consists of a trackball, scrollwheel and left and right mouse
buttons. You operate the unit just like a PC mouse; roll the trackball and operate the
left and right buttons and the scrollwheel to do various functions.
Left
button
1.4

DVD Drive

A USB DVD drive is provided to upload chart data to the system. Use the supplied ca-
ble to connect the drive - connect the end of the cable with the USB symbol to a USB
port on the PCU. If the power from the USB port is insufficient, the power lamp on the
drive flashes red. If this occurs, also connect the other end of the cable (labeled
"POWER") to the PCU to draw additional power.
The operating temperature range is 5°C(41°F) to 35°C(95°F).
1.5

How to Turn the Power On or Off

The power switch on the PCU illuminates in red when
the power is connected and the PCU is turned off. To
turn the power on, push the power switch until the lamp
in the switch illuminates in green.
To turn the power off, press and hold down the power
switch until the power goes off (approx. four seconds).
Scrollwheel
Right
button
Trackball
Left button
• Does the operation related to the object
selected.
• Confirms the operation done for the object
selected.
Scrollwheel
• Selects menu options.
• Selects chart scale.
• Sets numeric data.
• The scrollwheel does not have a "push" func-
tion.
Right button
• Displays context-sensitive menu when cursor
is put in the display area.
• Cancels operation done on the object
selected.
Trackball
• Moves the cursor.
• Selects an object.
1. INTRODUCTION
POWER
switch
1-3