Control Of Predefined Imo Chart Display Settings - Furuno FMD-3100 Operator's Manual

TT Pop-up INFO: Show or hide the TT pop-up, which is shown by right-clicking a TT.
AIS Pop-up INFO: Show or hide the AIS pop-up, which is shown by right-clicking an
TT(04)
COG: 235.0°T
SOG: 6.1kn
CPA: 0.23NM
TCPA: -10:18
TT pop-up info AIS pop-up info
Past position
TT Points: Select the number of TT past position points to display.
AIS Points: Select the number of AIS past position points to display.
Style: Select style of presentation of target's past position.
4.4 Control of Predefined IMO Chart Display
Settings
There are three sets of predefined chart display settings that can be used to display
charts with certain chart features. The predefined chart display settings are
• IMO BASE
• IMO STD(STANDARD)
• IMO ALL
You can change the chart display setting in use with the [Chart database] button on
the Status bar.
[Chart database] button
NAME VOYA...
COG: 324.0°T
SOG: 8.1kn
CPA: 0.12NM
TCPA: -19:18
4. HOW TO CONTROL CHART OBJECTS
4-11