Menu Window Setting; Adjusting The Menu Window - Furuno MU-170C Operator's Manual

3.3 Menu Window Setting

3.3.1 Adjusting the menu window

The menu window can be moved and translucentized on the OSD (On Screen Display)
menu.
1. Press the MENU key to show the main menu.
2. Press the ◄ or ► key to select OSD.
RGB1
H_POSITION
V_POSITION
TRANSLUCENT
PIP SW TIME
PIP SKIP
CUSTOM NAME
RGB1
RGB2
DVI
VIDEO1 = VIDEO1____
VIDEO2 = VIDEO2____
VIDEO3 = VIDEO3____
3. Press the ▲ or ▼ key to select the item to set.
4. Press the ◄ or ► key to adjust.
5. Press the MENU key to close the menu.
Menu item
H_POSITION
V_POSITION
TRANSLUCENT
PIP SW TIME
PIP SKIP
CUSTOM NAME
RGB2 DVI VIDEO1 VIDEO2
15 (1 – 29)
37 (1 – 37)
OFF (OFF/ON)
OFF (OFF, 5-20)
OFF (OFF, V1/V2/V3)
= RGB1______
= RGB2______
= DVI_______
OSD menu
Moves the menu window horizontally.
To the left (◄) ↔ To the right (►)
Moves the menu window vertically.
Up (◄) ↔ Down (►)
Translucentizes the background color on the
menu window.
OFF: Blue
ON: Translucent
Switches the screen image on the PIP window
among VIDEO1, VIDEO2 and VIDEO3 at the
interval (5-20 sec) selected here.
OFF: This function is turned off.
Chooses which video signals to display in the
PIP window when PIP SW TIME is enabled.
OFF: VIDEO1, VIDEO2 and VIDEO3 are shown
in turn.
V1: VIDEO2 and VIDEO3 are shown alternately.
V2: VIDEO1 and VIDEO3 are shown alternately.
V3: VIDEO1 and VIDEO2 are shown alternately.
See the next section.
VIDEO3 OSD
Function
10
SYSTEM
Available range
1-29
1-37
OFF, ON
OFF, 5-20
OFF, V1/V2/V3