How To Share Route During Route Monitoring - Furuno FMD-3100 Operator's Manual

11. HOW TO MONITOR ROUTES
11.8

How to Share Route During Route Monitoring

With multiple FMD-3100 units the backup setting works as follows:
• Backup ON: When route monitoring begins from the master unit (determined at in-
stallation), the backup units (other FMD-3xx0) display the route and monitor it.
• Backup OFF: When route monitoring begins from the master unit, the backup units
display route information in the Route Information box.
Follow the procedure below to set master and backup units.
1. On the menu, select [Monitoring] from the [Shared] menu to show the [Setting] di-
alog box.
2. Right click the equipment ID of the unit to set to show the pop-up menu. Select
[MASTER] or [BACKUP].
Only one unit can be a master unit. All other units are backup. One unit must be
as master unit.
Note 1: To turn off the sharing the feature for a unit, select [CLEAR] from the pop-
up menu.
Note 2: To restore the original setting for a unit, click the Status column, then se-
lect [Reset].
3. Click the [Save] button to save settings, then click the [Close] button to finish.
11-14
ECD001
ECD002