16
Load Documents in the Feeder
1
Pull out the document feeder tray.
2
Spread the document guides a little wider than the document's width.
3
Fan the document stack and align the edges of the pages.
Thoroughly fan the
paper in small batches.
4
Neatly place the documents face down.
•
Do not exceed the load limit guides (A).
5
Align the document guides tightly to the width of the document.
If the document guides are too loose or too tight, this may result in
IMPORTANT
IMPORTANT
misfeeds or paper jams.
Align the edges a few
times on a fl at surface.
A