Using The Machine For Faxing And Phoning; Using The Machine For Fax Only - Canon FAXPHONE L100 Basic Operation Manual

Using the Machine for Fax Only

Set the fax receive mode to <Auto>.
1
Switch to the Fax Mode (
2
▲ ▼
Press [ ] or [ ] to highlight <RX Mode>, and then press [OK].
3 ▲ ▼
Press [ ] or [ ] to highlight <Auto>, and then press [OK].
RX Mode
Auto
Fax/Tel Auto Switch
Manual
Answer
When a Fax or Call Comes In
When a fax comes in, the machine automatically begins receiving the fax after two rings. If a
voice call comes in, the caller will hear a fax tone.
To change the number of rings before the machine receives a fax, press
] (Menu)  <Fax RX Settings>  <Fax Settings>  <Incoming
[
Ring>  <On>, and then specify the number of rings.

Using the Machine for Faxing and Phoning

Set the fax receive mode to <Fax/Tel Auto Switch>.
1
Switch to the Fax Mode (
2
▲ ▼
Press [ ] or [ ] to highlight <RX Mode>, and then press [OK].
3 ▲ ▼
Press [ ] or [ ] to highlight < Fax/Tel Auto Switch>, and then press [OK].
RX Mode
Auto
Fax/Tel Auto Switch
Manual
Answer
4
Specify ring settings.
<Ring Start Specify how long the machine will attempt to detect a fax tone
Time> before the handset starts ringing ringing (4-30 seconds).
<Incoming Specify how long the handset will ring during an incoming call
Ring Time> (15-300 seconds).
Specify how the machine should behave when an incoming call
is not answered:
<After Ring>
•
<End>: Disconnects the call.
•
<RX>: Receives a fax.
5
After you have specifi ed the setting, press [
<Apply>, and then press [OK].
→
p.13).
→
p.13).
▲
] or [
▼
] to highlight
51