Power Supply Requirements; Installation Requirements - Canon FAXPHONE L100 Basic Operation Manual

Protecting the machine from condensation:
IMPORTANT IMPORTANT
•
To prevent condensation from forming inside the
machine in the following cases, let the machine
adjust to the ambient temperature and humidity for
at least two hours before use.
– When the room where the machine is installed is
heated rapidly
– When the machine is moved from a cool or dry
location to a hot or humid location
•
If water droplets (condensation) form inside the
machine, this can result in paper jams or poor print
quality.
When using an ultrasonic humidifi er:
When you are using an ultrasonic humidifi er, it is therefore
recommended that you use purifi ed water or other water that is
free of impurities.
If you use tap water or well water, impurities in the water will be
dispersed through the air. This can be trapped inside the machine,
causing degradation in print quality.

Power Supply Requirements

•
110 V to 127 V, 50/60 Hz
Precautions when connecting the power cord:
IMPORTANT IMPORTANT
•
Do not connect this machine to an uninterruptible
power source.
•
Use an AC power outlet exclusively for the machine.
Do not use the other sockets of the AC power outlet.
•
Do not plug the power plug into the auxiliary outlet
on a computer.
•
Do not use the same AC power outlet for both the
machine and any of the following equipment.
– Copy machine
– Air conditioner
– Shredder
– Equipment that consumes a large amount of
electricity
– Equipment that generates electrical noise
•
When unplugging the power cord, keep interval of 5
seconds or more before plugging it again.
Miscellaneous precautions
•
The maximum power consumption of the machine is
900 W or less.
•
Electrical noise or a dramatic drop in supplied voltage may
cause the machine or computer to operate incorrectly or lose
data.

Installation Requirements

•
A location with suffi cient space
•
A location with good ventilation
•
A location with a fl at, even surface
•
A location able to fully support the weight of the machine
Do not install the machine in the following
IMPORTANT IMPORTANT
locations, as this may result in damage to the
machine.
•
A location subject to dramatic changes in
temperature or humidity
•
A location subject to condensation
•
A poorly ventilated location
•
(If you use the machine for a long time or to perform
a large amount of printing in a poorly ventilated
room, the ozone or other odors generated by the
machine may create an uncomfortable working
environment. In addition, chemical particles are
dispersed during printing; therefore, it is important
to provide adequate ventilation.)
•
A location near equipment that generates magnetic
or electromagnetic waves
•
A laboratory or location where chemical reactions
occur
•
A location exposed to salt air, corrosive gases, or
toxic gases
•
A location, such as on a carpet or mat, that may
warp from the weight of the machine or where the
machine is liable to sink.
Installation Space
Required installation space
28 1/2" (724 mm)
4" (100 mm)
4" 4"
(100 mm) (100 mm)
22 1/2"
(572 mm)
Paper
cassette
4" (100 mm)
Maintenance and Inspections
•
Follow the instructions in the caution label attached
IMPORTANT IMPORTANT
to this machine.
•
Avoid shaking or applying a shock to this machine.
•
To prevent a paper jam, do not turn the power ON/
OFF, open/close the operation panel or rear cover,
and load/unload paper in the middle of printing
operation.
•
Be sure to remove the toner cartridge from the
machine when transporting the machine to a
distance.
•
To avoid exposing the toner cartridge to light, place
it in the protective bag included with this machine
or wrap it in a thick cloth.
•
Clean this machine regularly. If this machine
becomes dusty, it may operate improperly.
•
Use a modular cable of 118" (3 m) or shorter in
length.
•
Depending on your locale or your telephone
connection, you may be unable to perform data
communication. In this case, contact your local
authorized Canon dealer or the Canon help line.
•
The repairing parts and toner cartridges for the
machine will be available for at least seven (7) years
after production of this machine model has been
discontinued.
Customer Support
Customer Support (U.S.A.)
Your machine is designed with the latest technology to provide
trouble-free operation. If you encounter a problem with the
machine's operation, try to solve it by using the information in
Chapter 9. If you cannot solve the problem or if you think your
machine needs servicing, contact Canon Customer Care Center
4" (100 mm)
20 1/2"
(520 mm)
89