Compaq 7000 Series Maintenance And Service Manual page 42
Hide thumbs
Also See for 7000 Series:
- Replacing (40 pages) ,
- End-user replaceable parts program (21 pages) ,
- Manual (20 pages)
Table of Contents
Advertisement
Compaq Presario Internet PC 7000 Series Computers
PRODUCT DESCRIPTION
REMOVAL AND REPLACEMENT PROCEDURES
Removing the Expansion Card
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
ASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
GRAPHICS CARD
EXPANSION CARD
(Modem or Network
Card)
1394 CARD
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel -
Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
TROUBLESHOOTING
JUMPER AND SWITCH INFORMATION
Removal
Replacement
REMOVAL AND REPLACEMENT PROCEDURES
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Perform the preparation
1.
Turn the computer on its side (open side facing
2.
up) and locate the expansion card(s).
Remove the screw securing the expansion
3.
card.
Pull the expansion card using a gentle rocking
4.
motion from the connector on the system
board.
IMPORTANT:
The expansion card rear
connector must be properly inserted in
the rear chassis slot to ensure the card is
properly seated in the connector on the
system board.
Align the card with the connector on the
1.
system board and rear connector slots on the
chassis.
Replace the screw to secure the expansion
2.
card to the chassis.
United States
procedures.
Advertisement
Table of Contents
