Compaq 7000 Series Maintenance And Service Manual page 168
Hide thumbs
Also See for 7000 Series:
- Replacing (40 pages) ,
- End-user replaceable parts program (21 pages) ,
- Manual (20 pages)
Table of Contents
Advertisement
Failing Bits
Fixed Disk 0 or 1 Failure
Fixed Disk Controller Failure
Incorrect Drive A Type
Invalid NVRAM Media Type
Error Message
Disk Drive A Error
Extended RAM failed at
offset
Failing Bits nnn
Fixed Disk 0 or 1
Fixed Disk Controller Failure
Incorrect Drive A Type
Operating System Not Found System CMOS Checksum
Parity Check 1
Parity Check 2
Real Time Clock Error
System Battery is Dead
POST Messages
Probable Cause
Drive A: is present, but fails
the BIOS POST disk tests.
Extended memory not
working or not configured
properly.
nnn is a map of the bits at
the RAM address which
failed the memory test.
Hard drive is not working or
not configured properly.
Hard drive is not working or
not configured properly.
Type of disk in drive A: not
correctly indentified.
Back
System RAM Failed at Offset
System Timer Error
UMP Upper Limit Segment
Video BIOS Shadowed
Recommended Action
Run Setup.
1.
Replace the signal
2.
cables.
Replace the disk drive.
3.
Replace the
memory
1.
modules.
Replace the
system
2.
board.
Run Setup.
1.
Replace the
system
2.
board.
Run Setup.
1.
Replace the
system
2.
board.
Run Setup.
1.
Replace the
system
2.
board.
Replace the
memory
1.
modules.
Replace the
disk
drive.
2.
Advertisement
Table of Contents
