Compaq 7000 Series Maintenance And Service Manual page 199

Compaq Presario Internet PC 7000 Series Computers
PRODUCT DESCRIPTION
REMOVAL AND REPLACEMENT PROCEDURES
MODELS AND FEATURES
CPU CONTROLS AND LIGHTS
SIDE ACCESS PANEL
INTERNET KEYBOARD
CONTROLS
REAR CPU CONNECTORS
POWER CORD SET
REQUIREMENTS
TROUBLESHOOTING
JUMPER AND SWITCH INFORMATION
Power Cord Set Requirements
Requirements:
The power cord set (flexible cord and wall plug) received with the computer
meets the requirements for use in the country where the computer was
purchased.
Power cord sets for use in other countries must meet the requirements of the
country where you use the computer. For more information on power cord set
requirements, contact your Compaq authorized dealer, reseller, or service
provider.
General Requirements:
The requirements listed below are applicable to all countries:
The length of the power cord set must be at least 6.00 feet (1.8m) and a
1.
maximum of 9.75 feet (3.0 m)
All power cord sets must be approved by an acceptable accredited agency
2.
responsible for evaluation in the country where the power cord set will be
used.
The power cord set must have a minimum current capacity of 10A and a
3.
nominal voltage rating of 125 or 250 Volts AC, as required by each
country's power system.
The appliance coupler must meet the mechanical configuration of an EN 60
4.
320.IEC 320 Standard Sheet C13 connector, for mating with appliance inlet
on the Switch Box.
Country-Specific Requirements:
Country
United States
ILLUSTRATED PARTS CATALOG
Accredited Agency
UL*
United States
PRODUCT DESCRIPTION
SPECIFICATIONS