Connecting The Machine And Other Devices - Kyocera ECOSYS MA2100cwfx Operation Manual

Installing and Setting up the Machine > Connecting the Machine and Other Devices

Connecting the Machine and Other Devices

Prepare the cables necessary to suit the environment and purpose of the machine use.
When Connecting the Machine to the PC via USB
When Connecting the Machine to the PC or Tablet by network cable, Wi-Fi, or Wi-Fi direct
NOTE
If you are using wireless LAN, refer to the following.
Configuring the Wireless Network (page 2-20)
Cables that Can Be Used
Connection Environment
Connect a LAN cable to the
machine.
Connect a USB cable to the
machine.
IMPORTANT
Using a cable other than a USB 2.0 compatible cable may cause failure.
USB
Network
Wi-Fi access point
Tablet
Function
Printer/Scanner/Network FAX
Printer/Scanner (TWAIN/WIA)
2-7
Network cable
connection
Wi-Fi
*1
connection
Wi-Fi Direct
*1
connection
*1 Only for models with Wi-Fi.
Necessary Cable
LAN cable (10BASE-T, 100BASE-TX,
1000BASE-T)
USB 2.0 compatible cable (Hi-Speed USB
compliant, max. 5.0 m, shielded)