Kyocera ECOSYS MA2100cwfx Operation Manual page 178

Operation on the Machine > Sending Document to Folder on an FTP Server (Scan to FTP)
4
5
6
7
Enter the destination information.
Enter the information for each item and select the [OK] key.
Character Entry Method (page 11-8)
The table below lists the items to be set.
Item
*1
Host Name
*2
Path
Login User Name
Login Password
*1 You can also specify the port number. Enter the following format separated by a colon.
"Host name: port number" or "IP address: port number"
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [2001:db8:a0b:12f0::10]:21)
If the port number is not specified in [Host Name], the default port number is 21.
*2 When the FTP server is based on Linux/UNIX, the path including the sub-folder is combined by the
slash "/" not using the back-slash.
Check the status.
The connection confirmation screen appears. Select [Yes] to check the connection and [No] to
not check it.
"Connected." appears when connection to the destination is correctly established. If "Cannot
connect." appears, review the entry.
To send to multiple destinations, repeat steps 3 to 4.
Destinations can be changed later.
Checking and Editing Destinations (page 5-35)
Select the functions.
Select the [Function Menu] key to select the send functions to use.
Send (page 6-4)
Press the [Start] key.
Sending starts.
Data to be entered
Host name or IP address of FTP server
Path to the receiving folder
For example: User\ScanData
Otherwise the data will be saved in the home directory.
FTP server login user name
FTP server login password
(Case sensitive.)
5-22
Max.
characters
Up to
64 characters
Up to
128 characters
Up to
64 characters
Up to
64 characters