Kyocera ECOSYS MA2100cwfx Operation Manual page 279

Setup and Registration (System Menu) > System Menu
Item
Resolution
Job Terminator
Set the resolution used for printing.
Value: 600 dpi, 1200 dpi
NOTE
Settings that are received from the printer driver have priority over the operation panel settings.
You can select the condition which regarded as a job termination if the print job could not be
processed until the end due to your environment and the other reason.
Value:
EOJ: The command recognized as a termination of the job data is regarded as one job
until it is detected.
End of Session: The data included in a network session at network connection is
regarded as one job.
UEL: The UEL included in the termination of the job data is regarded as one job until it is
detected.
8-35
Description