Group Authorization Settings - Kyocera ECOSYS MA2100cwfx Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Group Authorization Settings

Set restrictions of the machine usage by each individual group registered in the authentication server.
NOTE
• To use the group authorization settings, [Netwk Authentic.] must be selected for the authentication method in
"Enabling User Login Administration". Select "On" for "LDAP" in "Protocol Settings".
Enabling User Login Administration (page 9-3)
ProtocolSettings (page 8-11)
• Setting to use group authorization is performed from the operation panel. The groups should be registered with
Command Center RX.
Command Center RX User Guide
Group Authorization
1
2
Display the screen.
1
[System Menu/Counter] key > [▲] [▼] key > [User/Job Account] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
Login Password:
2 [▲] [▼] key > [User Login Set.] > [OK] key
Configure the setting.
[▲] [▼] key > [Group Auth.] > [OK] key > [▲] [▼] key > [Off] or [On] > [OK] key
2100
2100
9-14