Printer - Kyocera ECOSYS MA2100cwfx Operation Manual

Setup and Registration (System Menu) > System Menu

Printer

[System Menu/Counter] key > [▲] [▼] key > [Printer] > [OK] key
Printing from computers, settings are generally made on the application software screen. However, the following
settings are available for configuring the defaults to customize the machine.
Item
Emulation Set.
KPDL Error Rpt
Color Setting
EcoPrint
Override A4/LTR
Duplex
Copies
Orientation
Gloss Mode
Wide A4
Select the emulation for operating this machine by commands oriented to other types of
printers.
Value: PCL6, KPDL, KPDL (Auto)
NOTE
When you have selected [KPDL] or [KPDL (Auto)], set "KPDL Error Rpt", too.
When an error has occurred during printing in KPDL emulation mode, set whether or not the
error report is output.
Value: Off, On
You can choose whether reports are printed in color or black and white.
Value: Color, Black & White
EcoPrint conserves toner when printing. This is recommended for test copies where faded
printing is not a problem.
Value: Off, On
Select whether to treat A4 size and Letter, which are similar in size, as the same size when
printing.
Value
Off: A4 and Letter are not regarded as the same in size.
On: A4 and Letter are regarded as the same in size. The machine will use whichever size
is in the paper source.
Select binding orientation for duplex mode.
Value: Off, Bind Long Edge, Bind Short Edge
Set the default number of copies, from 1 to 999.
Value: 1 to 999 copies
Set the default orientation, [Portrait] or [Landscape].
Value: Portrait, Landscape
Gloss Mode increases the effect of glossiness in printing. However, printing takes longer time.
Value: Off, On
IMPORTANT
Gloss Mode is not available when [Labels] or [Transparency] is selected as the paper
type setting.
Cassette 1 (2) Set. (Cassette 1 (2) Settings) (page 8-23)
MP Tray Set. (Multipurpose Tray Settings) (page 8-23)
Depending on the paper used, printing in gloss mode may cause curl in paper.
To reduce curl, try using thicker paper.
Turn this to on to increase the maximum number of characters that can be printed in a line for
an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10 pitch). This
setting is only effective in PCL6 emulation.
Value: Off, On
8-33
Description