Operation on the Machine > Send to Me (Folder)
Send to Me (Folder)
When user login is enabled, the document is sent to the E-mail address of the logged in user.
NOTE
• To use this function, user control must be set to network authentication and the folder of the user must be registered
in the network authentication server.
• For the procedure for setting a folder, check with the administrator for network authentication server users.
Sending a document to the folder of the logged in
user
1
In the basic screen for sending, select [▲] [▼] key >
[Me(Folder)] > [OK] key
NOTE
If the folder is not registered in the network authentication server, the scanned document
cannot be sent to the folder.
5-30