Table of Contents
Advertisement
User's Guide
2. Select Wi-Fi (Recommended).
The network status is displayed.
3. Tap Change Settings.
4. Select Others > Disable Wi-Fi.
5. Check the message, and then start setup.
6. When a completion message is displayed, close the screen.
The screen automatically closes after a specific length of time.
7. Close the network connection settings screen.
Disconnecting Wi-Fi Direct (Simple AP) Connection
from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specific device, disconnect from the device
instead of the printer.
1. Tap
on the home screen.
2. Select Wi-Fi Direct.
The Wi-Fi Direct information is displayed.
3. Tap Change Settings.
4. Select Disable Wi-Fi Direct.
5. Tap the Disable the settings.
6. When a completion message is displayed, close the screen.
The screen automatically closes after a specific length of time.
7. Close the Network Connection Settings screen.
Restoring the Network Settings from the Control
Panel
You can restore all network settings to their defaults.
1. Select Settings on the home screen.
2. Select Restore Default Settings > Network Settings.
Network Settings
41
Advertisement
Table of Contents
