Wi-Fi Specifications; Ethernet Specifications - Epson WorkForce WF-2860DWF User Manual

Table of Contents

Advertisement

User's Guide
Functions
Network Scanning
Epson Scan 2
Event Manager
Epson Connect (Scan to
Cloud)
AirPrint (Scan)
ADF (2-sided scanning)
Fax
Send a fax
Receive a fax
AirPrint (Faxout)

Wi-Fi Specifications

Standards
Frequency Range
Maximum Radio-Frequency Power
Transmitted
Coordination Modes
Wireless Securities
*1
Complies with either IEEE 802.11b/g/n or IEEE 802.11b/g depending on location of purchase.
*2
IEEE802.11n is only available for the HT20.
*3
Not supported for IEEE 802.11b.
*4
Complies with WPA2 standards with support for WPA/WPA2 Personal.

Ethernet Specifications

Standards
Communication Mode
Connector
*1
Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
*2
The connected device should comply with IEEE802.3az standards.
Appendix
IPv4, IPv6
IPv4
IPv4
IPv4, IPv6
IPv4
IPv4
IPv4, IPv6
*1*2
IEEE802.11b/g/n
2.4 GHz
19.8 dBm (EIRP)
Infrastructure, Wi-Fi Direct (Simple AP)
WEP (64/128bit),WPA2-PSK (AES)
IEEE802.3i (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet)
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps
Full duplex, 100Mbps Half duplex
RJ-45
216
Supported
-
*3
*4
*1
*2
Remarks
-
-
-
OS X Mavericks or
later
-
-
-
OS X Mountain
Lion or later

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workforce wf-2860 series

Table of Contents