Transporting The Machine - Canon MG2100 Series On-Screen Manual

Transporting the Machine

>
Home Overview of the Machine
Transporting the Machine
When relocating the machine, make sure of the following.
Important
When sending the machine for repair
Pack the machine in a sturdy box so that it is placed with its bottom facing down, using sufficient protective
material to ensure safe transport.
With the FINE cartridge left installed in the machine, press the ON button to turn off the power. This allows the
machine to automatically cap the print head, thus preventing it from drying.
After packing, do not tilt the box containing the machine or turn it on its side or upside down. Doing so may
cause the ink to leak during transport and cause damage to the machine.
When a shipping agent is handling transport of the machine, have its box marked "THIS SIDE UP" to keep the
machine with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".
1.
Turn the machine off.
2.
Confirm that the Paper lamp is off and unplug the machine.
Important
Do not unplug the machine while the Paper lamp is lit or flashing green, as it may cause malfunction or
damage to the machine, making the machine unable to print.
3.
Retract the paper output support, then close the paper output tray. Retract the paper
support with the output tray extension closed, then close the front cover.
4.
Disconnect the printer cable from the computer and from the machine, then
disconnect the power plug from the machine.
5.
Use adhesive tape to secure all the covers on the machine to keep them from
opening during transportation. Then pack the machine in the plastic bag.
6.
Attach the protective material to the machine when packing the machine in the box.
This manual downloaded from http://www.manualowl.com
>
Tips on How to Use Your Machine > Transporting the Machine
Page top
Page 712 of 731 pages