Operation Panel - Canon MG2100 Series On-Screen Manual

Operation Panel

>
Home Overview of the Machine
Operation Panel
C012
Operation Panel
* The Alarm lamp is shown lit in the illustration below for explanatory purposes.
(1) ON button
Turns the power on or off. Before turning on the power, make sure that the document cover is
closed.
Important
Disconnecting the power plug
When disconnecting the power plug after turning off the power, be sure to confirm that the Paper
lamp is not lit. If the power plug is disconnected from the wall outlet while the Paper lamp is lit or
flashing, the machine may become unable to print properly since the print head is not protected.
Note
It may take a while for the machine to start printing immediately after you turn on the machine.
Auto power off feature
You can set the machine to automatically turn off when no operations are performed or no print jobs
are sent to the machine for a certain interval. This is the default setting.
For details on how to change the auto power off setting, see below.
From the machine
Turning off the Machine Automatically
From the computer
Managing the Machine Power
(2) LED (Light Emitting Diode)
Displays the number of copies, Maintenance code, or operational status such as an error code.
(3) [+] button
Specifies the number of copies.
This manual downloaded from http://www.manualowl.com
>
Main Components and Basic Operations
Page 620 of 731 pages
> >
Main Components