Canon MG2100 Series On-Screen Manual page 621

Operation Panel
ink lamps
(4)
Light or flash orange when ink runs out, etc. The lamp on the left indicates the color FINE
cartridge status and the lamp on the right indicates the black FINE cartridge status.
(5) Paper button
Selects the page size and media type.
(6) Fit to Page button
Enables the Fit-to-Page copy function, allowing you to copy the original automatically enlarged
or reduced to fit the selected page size. When the Fit-to-Page copy function is disabled, you can
make copies in the same size as the original.
SCAN button
(7)
Starts scanning the original to save it on the computer.
(8) Stop/Reset button
Cancels operations. You can also press this button to cancel a print, copy, or scan job in
progress.
(9) Color button*
Starts color copying. You can also press this button to finalize your selection for the setting item.
(10)
Black button*
Starts black & white copying. You can also press this button to finalize your selection for the
setting item.
(11)
(Maintenance) button
Specifies the Maintenance code.
(12) Fit to Page lamp
Lights up when the Fit-to-Page copy function is enabled by pressing the Fit to Page button.
(13) Paper lamp
Lights to indicate the page size and media type selected with the Paper button.
(14) Alarm lamp
Lights or flashes orange when an error occurs, such as paper-out or ink-out.
* In the software applications or manuals, the Color and Black buttons are collectively called the
"Start" or "OK" button.
This manual downloaded from http://www.manualowl.com
Page 621 of 731 pages
Page top