Scangear (Scanner Driver) Does Not Start - Canon MG2100 Series On-Screen Manual

ScanGear (Scanner Driver) Does Not Start

> >
Home Troubleshooting
Driver) Does Not Start
S903
ScanGear (Scanner Driver) Does Not Start
Check 1: Make sure that the MP Drivers is installed.
If it is not installed, insert the Setup CD-ROM into the computer's disc drive, then select Custom Install
and install MP Drivers.
Check 2: On the menu of the application, select the machine.
Important
If the machine name is displayed multiple times, select the one that does not include WIA.
Note
The operation may differ depending on the application.
Use the WIA driver when scanning from a WIA-compliant application.
Scanning with WIA Driver
Check 3: Make sure that the application is TWAIN-compliant.
You cannot open ScanGear (scanner driver) from applications not supporting TWAIN.
Check 4: Scan and save the image using MP Navigator EX, then import it
into the application.
You can specify which application to start after scanning, in Application Settings of the Custom dialog box
of MP Navigator EX.
Custom Dialog Box
This manual downloaded from http://www.manualowl.com
>
Problems with Scanning Problems with Scanning
Page 543 of 731 pages
> ScanGear (Scanner
Page top