Scanning Multiple Documents At One Time With Scangear (Scanner Driver) - Canon MG2100 Series On-Screen Manual

Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)

> >
Home Scanning Scanning from a Computer
Scanning with Advanced Settings Using ScanGear (Scanner Driver)
One Time with ScanGear (Scanner Driver)
S208
Scanning Multiple Documents at One Time with ScanGear
(Scanner Driver)
You can scan two or more photos (small documents) on the Platen at one time on the Basic Mode tab
and Advanced Mode tab.
This section explains how to scan multiple documents from the Basic Mode tab.
Important
To scan multiple documents as a single image, scan in whole image view.
The following types of documents may not be cropped correctly. In that case, adjust the cropping
frames (scan areas) in whole image view and scan.
- Photos that have a whitish border
- Documents printed on white paper, hand-written text, business cards, etc.
- Thin documents
- Thick documents
Scanning Multiple Documents in Whole Image View
The following types of documents cannot be cropped correctly.
- Documents smaller than 1.2 inches (3 cm) square
- Photos that have been cut to various shapes
Note
See "Scanning in Auto Scan Mode
You can also scan multiple documents at one time from the Advanced Mode tab. Use the Advanced
Mode tab to make advanced scan settings such as the color mode, output resolution, image
brightness and color tone.
See the corresponding sections below for details on the Basic Mode tab and Advanced Mode tab.
Basic Mode Tab
Advanced Mode Tab
1.
Place the document on the Platen, then start ScanGear (Scanner Driver).
Placing Documents (When Scanning from a Computer)
Starting ScanGear (Scanner Driver)
2.
Set Select Source according to the document placed on the Platen.
This manual downloaded from http://www.manualowl.com
>
Scanning with Other Application Software (ScanGear)
" to scan easily by automatically detecting the document type.
> Scanning Multiple Documents at
Page 444 of 731 pages
>