Adjusting Saturation And Color Balance - Canon MG2100 Series On-Screen Manual

Adjusting Saturation and Color Balance

> >
Home Scanning Scanning from a Computer
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
Balance
S303
Adjusting Saturation and Color Balance
In ScanGear (scanner driver)'s Advanced Mode tab, click
Note
Click Defaults to reset all adjustments in the current window.
Saturation
Adjust the image's saturation (vividness). You can brighten colors that have faded with time, etc.
Move
(Slider) under Saturation to the left to decrease the saturation (darken the image), and to the
right to increase the saturation (brighten the image). You can also enter a value (-127 to 127).
Saturation decreased
Note
The natural color tone of the original image may be lost if you increase saturation too much.
Color Balance
This manual downloaded from http://www.manualowl.com
>
Scanning with Other Application Software (ScanGear)
(Saturation/Color Balance).
Original image Saturation increased
> Adjusting Saturation and Color
Page 454 of 731 pages
>