Adjusting Brightness and Contrast
>
>
Home
Scanning
Scanning from a Computer
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
Contrast
S304
Adjusting Brightness and Contrast
In ScanGear (scanner driver)'s Advanced Mode tab, click
Note
Click
(Down arrow) to switch to detailed view. Click
Click Defaults to reset all adjustments in the current window.
Channel
Each dot of an image is a mixture of Red, Green, and Blue in various proportions (gradation). These
colors can be adjusted individually as a "channel."
Master
Adjust the Red, Green, and Blue combined.
Red
Adjust the Red channel.
Green
Adjust the Green channel.
Blue
This manual downloaded from http://www.manualowl.com
>
Scanning with Other Application Software (ScanGear)
> Adjusting Brightness and
(Brightness/Contrast).
(Up arrow) to return to the previous view.
Page 456 of 731 pages
>