Loading Originals On The Platen Glass - Canon MG2100 Series On-Screen Manual

Loading Originals on the Platen Glass

>
Home Overview of the Machine
the Platen Glass
C063
Loading Originals on the Platen Glass
You can load originals to copy or scan on the platen glass.
1.
Load an original on the platen glass.
(1) Open the document cover.
Load the original WITH THE SIDE TO SCAN FACING DOWN on the platen
(2)
glass.
Align the corner of the original with the alignment mark
Important
Be sure to observe the following when loading the original on the platen glass.
- Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
- Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down the
original.
Failure to observe the above may cause the scanner to malfunction or the platen glass to break.
The machine cannot scan the shaded area (A) (0.04 inches (1 mm) from the edges of the platen glass).
This manual downloaded from http://www.manualowl.com
> >
Loading Paper / Originals Loading Originals > Loading Originals on
.
Page 645 of 731 pages