Kyocera TASKalfa 6003i Operation Manual page 490

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Configuring Guest Property
Register guest user information and functions that are restricted.
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Model Name
TASKalfa 5003i
TASKalfa 6003i
2
"User Login Setting" [Next] > "Guest Authorization Set." [Next] > "Guest Property" [Next]
Configure the settings.
Check the settings and change or add information as needed.
Item
User Name Enter the name displayed on the user list (up to 32 characters).
The default setting is "Guest User".
Access Level The authority of the user appears. This cannot be changed.
Account Name Add an account where the user belongs.
If the user does not belong to any account, select [Others].
Login User Name
5000
6000
Descriptions
9-23
Login Password
5000
6000