Kyocera TASKalfa 6003i Operation Manual page 115

Installing and Setting up the Machine > Installing Software
Custom Install
The following procedure is an example for installing the software in Windows 8.1 using [Custom Install].
1
2
When "Your software is ready to use" appears, you can use the software. To print a test
page, click the "Print a test page" checkbox and select the machine.
Click [Finish] to exit the wizard.
If a system restart message appears, restart the computer by following the screen prompts.
This completes the printer driver installation procedure.
If you are installing the TWAIN driver, continue by configuring the following:
Setting TWAIN Driver (page 2-56)
Insert the DVD.
NOTE
• Installation on Windows must be done by a user logged on with administrator privileges.
• If the "Welcome to the Found New Hardware Wizard" dialog box displays, select
[Cancel].
• If the autorun screen is displayed, click [Run setup.exe].
• If the user account management window appears, click [Yes] ([Allow]).
Display the screen.
1
After clicking [Accept] in the license dialog box, depending on your region, a message about
resource and energy conservation may appear. Read the message and click [OK].
After installation is successful, "Set Duplex as default" appears and is selected on the Finished
page. The driver is set to duplex mode by default.
1 Click [View License Agreement]
2 Click [Accept].
2
2-49
and read the License Agreement.