Kyocera TASKalfa 6003i Operation Manual page 444

Setup and Registration (System Menu) > System Menu
Item
LPD
Wi-Fi Direct
Wi-Fi
Wired Network
Raw
Wi-Fi Direct
Wi-Fi
Wired Network
IPP
Wi-Fi Direct
Wi-Fi
Wired Network
IPP over SSL
Wi-Fi Direct
Wi-Fi
Wired Network
HTTP
Wi-Fi Direct
Wi-Fi
Wired Network
HTTPS
Wi-Fi Direct
Wi-Fi
Wired Network
Selects whether to receive documents using LPD.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to receive documents using Raw Port.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Selects whether to receive documents using IPP. To use the IPP protocol, set [IPP] to
[On], and set [SSL] to [Off]. In addition, select [Not Secure (IPP&IPPS)] on IPP
Security under Security Settings from the Command Center RX. The default port
*1
number is 631.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
To use the IPP protocol, set [IPP] and [SSL] to [On]. The default port number is
*1, *2
443.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to communicate using HTTP.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to communicate using HTTPS.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
8-60
Description
*1
*1
*1
*1, *2