In The Event Of A Blackout; Settings - Smeg SO4606APNR Manual

In the event of a blackout

Following a power failure during a function, the
appliance automatically resumes the function it
was performing, maintaining all the previous
settings and discounting the time already
elapsed of the function only if:
• the duration of the power failure is less than
or equal to 60 seconds;
• the function does not include the use of
microwaves (depending on the model);
• the pyrolytic function is in progress
(depending on the model);
• the Sabbath function is in progress
(regardless of power failure time).
If the power failure occurs in a condition other
than those described above, the appliance
remains waiting for manual consent to continue
or not the function from the user for a certain
time.
If the function is reactivated, the cooking settings
remain as they were before the blackout, taking
into account the time already elapsed.
If there is no intervention by the user, the
appliance cancels the function and the display
shows the current time again.
(SmegConnect models only) A
notification also appears in the app
when you reconnect.
Blackout during a programmed function
If the power failure occurs while a programmed
cooking process is set:
• If the blackout is restored within the set start
time, the appliance remains in standby
mode updating the time until start.
• If the blackout is restored after the set start
time, the device waits for the function to start
and, if after a certain time there is no
intervention by the user, the appliance
cancels the function and the display shows
again the current time.

Settings

In the event of a temporary power cut,
all personal settings will remain stored.
The product configuration can be set using this
menu.
• Touch the SETTINGS
main menu (at the right in the lower area
).
114 - USE
button on the
Connection setting (SmegConnect models
only)
Menu where connectivity parameters
are displayed.
• In the "settings menu
CONNECTION SETTINGS
For CONNECTION settings
please refer to the "Built-in Oven
Connectivity" manual.
Clock settings
Menu where you can set the time and
type of display.
• In the "settings menu
SETTINGS
Digital clock
Displays the current time in digital
format.
In the event of a temporary power cut,
the digital version will remain selected.
1. Select Digital clock.
2. Select On.
Touch the CONFIRM
activate the Digital clock mode.
" touch the
button.
" touch the CLOCK
button.
button to
914779675/A