Garland moisture+ MPGD10D Service Manual page 51

TESTING & TROUBLESHOOTING
Outputs
There are two 30 amp relay
connections, one each to switch the
motor between high and low speed .
Part # MPSM07 (03/24/08)
There is one 10 amp relay for
controlling the oven cavity light
There is one 10 amp relay for
controlling the moisture
There is one 3 amp output for the control
compartment cooling fan . This output will
be controlled by the On/Off key on the
control panel . It will also be active if the
control goes into Cool Down
There is one 10 amp relay for
switching the heat circuit on
and off as required
10A
10A
10A
3 amp
Page 51