Garland moisture+ MPGD10D Service Manual page 50

Table of Contents

TESTING & TROUBLESHOOTING

Inputs

There are two input tabs to

accept 24VAC from the relay

board transformer (TR1) .

There are two 2 wire connections, one

for each door switch connection

Page 50

There are two sense lines . This circuit is internal, and

signals the control to turn on the "HEAT" message in

the lower right corner of the display . One circuit is

for gas ovens, the second is for electric ovens . Both

will use the same common terminal .

There are two tabs each for the sense of the

1000 ohm RTD probes . One cavity probe

that must always be present, and one for an

optional core probe for use with cooking .

Part # MPSM07 (03/24/08)

Table of Contents