Table of Contents
Advertisement
EXPLANATION OF CONTROLS (Standard Models)
Mechanical Control, (Standard Models
)
Moisture Control
40
35
45
30
50
This controls the duration of the moisture injection into the
oven cavity . This is a rotary dial .
25
55
20
Moisture Switch
60
15
LOW
This rocker switch has three positions . The center position is
OFF . This shuts off electrical power to the moisture system .
The AUTO position energizes the system until the switch is
turned off . This activates the injecting timer at the intervals
manually set with the moisture control . The MANUAL position
is momentary . Pressing will cause the moisture injector to
inject moisture .
Fan Speed Switch
The left rocker switch, the fan speed switch, has two positions .
The motor and fan can be run at either high speed, (1725
RPM), by pressing the switch upward to HI, or low speed,
(1140 RPM), by pressing the switch downward to LO .
Power Switch
The right rocker switch . This main control switch has three
positions . The center position is OFF . This shuts off electrical
power to all functional components . The COOK position
energizes the timer, thermostat and moisture functions . The
COOL DOWN position energizes the motor and fan only .
Light Switch
This switch activates the oven interior light . This is a
momentary switch . The light will stay lit as long as this button
is held in the on position . The light will operate in any mode,
whenever there is electrical power connected to the oven .
Temperature
The temperature range is from 150°F, (66°C), to 500°F, (260°C) .
Temperature is controlled by aligning the indicator to the
desired temperature .
Timer
The timer is set by rotating the dial clockwise aligning the
indicator to the desired time cycle . At the end of the timing
cycle, a buzzer will sound . The buzzer is turned off by rotating
the dial counterclockwise to the OFF position . The buzzer will
sound continuously until manually turned off .
Page 16
Part # MPSM07 (03/24/08)
Advertisement
Table of Contents
