Display; Drawer Lock Key - Sharp XE-A147 Basic User Manual

Electronic cash register
Hide thumbs Also See for XE-A147:
Table of Contents

Advertisement

5

Display

■ Operator display
Your cash register is equipped with a front LED (Light-Emitting Diode) display that affords easy visibility of 9
digits for the operator during transaction.
PLU/Subdepartment code
Department code Repeat
Receipt off (".")
Appears in the far-right eight (max.) positions. When the amount is negative, the minus symbol "-"
Amount:
appears before the amount.
Number of repeats for repetitive registrations:
The number of repeats is displayed, starting at "2" and incremental with each repeat. When you
have registered ten times, the display will show "0". (2 → 3 ..... 9 → 0 → 1 → 2 ... )
Receipt function status:
The indicator "." appears in the receipt off position when the receipt function is in the OFF status.
Appears in the first to fifth positions (using 24-hour format) in the REG or
Time:
s
key to display the time.
■ Machine state symbols
: Appears during programming.
: Appears with an error code when an error is detected. For the details of error codes, please refer to
"Error code table".
: Appears when the subtotal is displayed or when the amount tendered is smaller than the sales amount.
: Appears when the
: Appears when a transaction is finalized by pressing the
: Appears when the change due amount is displayed.
: Appears in the far-left three positions at the timing of key entry when the electronic journal (EJ) memory
is full. (Depending on programming.)
: Appears when the voltage of the installed batteries is under the required level. You must replace with
new ones within two days. Refer to page 30 for details.
: Appears when the batteries are not installed, or the installed batteries are dead. You must replace with
new ones immediately. Refer to page 30 for details.
: May appear right below the seventh and eighth places at the timing of finalization of a transaction when
the electronic journal (EJ) memory is nearly full.
: Appears when programmed date (and time) for EURO modification operation has come.
: Appears when the paper is not set or out.
6

Drawer Lock Key

This key (the same key as mode key) locks and unlocks
the drawer. To lock it, turn 90 degrees counterclockwise.
To unlock it, turn 90 degrees clockwise.
Shift for the character entry ("_")
DC for the character entry ("_")
V
key is pressed to calculate a subtotal in foreign currency.
A
C
c
,
or
key.
mode. Press the
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xe-a137Xe-a137-bkXe-a147-bkXe-a137-whXe-a147-wh

Table of Contents