Power Connector - HP Pavilion DM1-2060 Maintenance And Service Manual

Power connector

Description
Power connector (includes power connector cable and security cable bracket)
Before removing the power connector, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. hard drive cover (see
b. Hard drive (see
c. Keyboard (see
d. Top cover (see
e. Display assembly (see
f. Security cable bracket (see
g. System board (see
Remove the power connector:
1. Disconnect the power connector cable from the system board.
2. Remove the power connector.
Reverse this procedure to install the power connector.
68 Chapter 4 Removal and replacement procedures
Battery on page 36).
WLAN module on page
Drives on page 44).
Keyboard on page 47).
Top cover on page 50).
Display assembly on page
Security cable bracket on page
System board on page
38).
58).
64).
66).
Spare part number
591851-001