Digital Media Assembly - HP Pavilion DM1-2060 Maintenance And Service Manual

Digital media assembly

Description
Digital media assembly (includes cable)
Before removing the digital media assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive cover (see
6. Remove the hard drive (see
7. Remove the keyboard (see
8. Remove the top cover (see
Remove the digital media assembly:
1. Position the computer right-side up, with the front toward you and the display open as far as
possible.
2. Disconnect the ZIF digital media assembly cable (1).
3. Remove the PM2.0×3.5 screw (2) that secures the digital media assembly to the base enclosure.
4. Remove the digital media assembly (3).
Reverse this procedure to install the digital media assembly.
Battery on page 36).
WLAN module on page
Drives on page 44).
Keyboard on page 47).
Top cover on page 50).
Spare part number
611693-001
38).
Component replacement procedures 57