Installing OS/2 Warp 4.0
This section describes how to set up the operating system and drivers including the
following:
Disabling infrared.
Preparing for software installation.
Installing OS/2 Warp 4.0.
Installing video support.
Creating a video drivers disk.
Installing sound support.
Installing SCSI support.
To disable infrared
OS/2 Warp 4.0 does not support infrared communications. Disable the infrared port
on the OmniBook before installing OS/2 Warp.
1. Restart the OmniBook.
2. Press F2 when prompted to enter the System Configuration Utility (SCU).
3. Uncheck Infrared on the Input/Output menu.
4. Save and Exit the SCU.
Using OS/2 Warp 4.0
Installing OS/2 Warp 4.0
6-3