Installing Windows Nt 3.51; To Disable Infrared; To Install Windows Nt 3.51 - HP OmniBook 800 Evaluator Manual
Corporate evaluator’s guide
Hide thumbs
Also See for OmniBook 800:
- Installation and setup manual (88 pages) ,
- User manual (79 pages) ,
- Getting started manual (54 pages)
Table of Contents
Advertisement
Installing Windows NT 3.51
This section describes how to set up the operating system and drivers including the
following:
Disabling the infrared port.
Installing Windows NT 3.51.
Installing video support.
Installing sound support.
To disable infrared
Windows NT 3.51 does not support infrared communications. Disable the infrared
port on the OmniBook before installing Windows NT.
1. Restart the OmniBook.
2. Press F2 when prompted to enter the System Configuration Utility (SCU).
3. Using the Alt key, open the Input/Output menu and deselect Enable IrDA IR.
4. Save and Exit the SCU.
To install Windows NT 3.51
1. Connect the ac adapter to the OmniBook.
2. Connect the external floppy disk drive and insert the Setup Book disk.
3. Connect the OmniBook external CD ROM and insert the Windows NT
Installation CD.
4. Restart the OmniBook.
5. When prompted, insert Disk 2, then press Enter.
6. Press Enter at the Windows NT Workstation Setup Welcome screen.
7. Press Enter to choose Express Setup.
Using Windows NT 3.51
Installing Windows NT 3.51
4-3
Advertisement
Table of Contents
