To Insert And Eject A Floppy Disk - HP OmniBook 5700 Installation And Setup Manual

floppy disk indicator
C A U T I O N
Starting Out with Your OmniBook
Using OmniBook Accessories

To insert and eject a floppy disk

When the OmniBook is reading or writing data to the floppy disk drive, the floppy
disk indicator appears on the Status Panel (above the function keys).
Do not insert or remove a floppy disk while the OmniBook is actively reading
or writing data. Wait until the floppy disk drive stops reading or writing.
Otherwise, you could lose data or the OmniBook could stop responding.
1. Hold the disk with its face up, then slide it into the floppy disk drive slot until it
clicks into place.
2. To remove the floppy disk, press the eject button on the front of the floppy disk
drive.
1-22