HP OmniBook 5700 Installation And Setup Manual page 78

Changing the Configuration
Using the System Configuration Utility
Set User password
PC Identification
Internal Cache
External Cache
Disks menu
Floppy Disk Drive
Hard Disk Drive
Input/Output menu
COM Ports
LPT Port
LPT Type
Keyboard Setup
External devices
Audio Port
Power menu
Power Controls
4-10
The user password protects user events selected in Password Options, but
doesn't give access to protected administrator options, such as PC ID.
Four text strings for name, company, address, phone.
Enables faster performance by using internal processor memory.
Enables faster performance by using external cache memory.
Specifies the type of floppy disk drive.
Specifies the type of hard disk for a nonstandard hard disk.
Sets serial and infrared port addresses and interrupts.
Sets printer port address.
Sets printer port communication.
Key Delay. Sets how long you hold a key down before the character starts
repeating.
Key Repeat Rate. Sets how fast characters repeat.
Keyboard Numlock. Sets whether Num Lock is active after rebooting.
VGA Display device. Sets whether the built-in display is on or off when an
external display is present.
Force recognition of external VGA. Overrides automatic detection of an
external display.
Enable External FN Key. Lets you press CTRL+ALT instead of FN on an
external keyboard with no FN key.
Ignore External Pointing Device. Activates the built-in pointing device
when an external mouse is connected.
Sets the volumes for the beeper signal and the sound speaker.
Power Saving should be On for power savings, Off for no power
management. If an Advanced Power Management driver is loaded, power
Immediate.
Immediate.
Reboot required.
Reboot required.
Reboot required.
Reboot required.
Reboot required.
Reboot required.
Reboot required.
Reboot required.
Save required.
Save required.
Reboot required.