HP OmniBook 5700 Installation And Setup Manual page 21

C A U T I O N Windows 95 can become unstable if you press the square Off button without
properly shutting down Windows.
C A U T I O N If you have active network connections, or if you have any SCSI devices
connected, plug in the ac adapter and press the blue On/Suspend button to
stop the OmniBook. These connections and devices are disconnected if you
stop the OmniBook any other way.
Windows 95 can restore network connections and SCSI devices when you turn on
the OmniBook. For a different operating system, you may have to reboot the
OmniBook or restart the operating system to restore them.
Press Fn+F12 simultaneously with the ac adapter unplugged. This stores the
current session on the hard disk and completely shuts down the OmniBook.
The computer reboots when you turn it on, then restores the session.
–or–
Shut down Windows, then press the square Off button on the left side of the
case for 2 seconds. This deletes the current session and completely shuts down
the OmniBook. The computer reboots when you turn it on and starts a new
session.
Off button
Starting Out with Your OmniBook
A tour of the OmniBook
1-13