To Install The Floppy Disk Drive - HP OmniBook 5700 Installation And Setup Manual

To install the floppy disk drive

1. If necessary, remove the current accessory module from the OmniBook.
2. Slide the floppy disk drive into the OmniBook until it clicks into place.
Important The external floppy disk drive works only with the OmniBook's parallel port. It does
not work with the parallel port on the docking system.
–or–
Connect the floppy disk drive to the OmniBook externally by pulling out the
floppy disk drive cable and connecting it to the parallel port on the left side of
the OmniBook.
Parallel port
Starting Out with Your OmniBook
Using OmniBook Accessories
1-21