To Replace The Battery - HP OmniBook 5700 Installation And Setup Manual

Fully charged battery
Slide switch to
release battery.
Starting Out with Your OmniBook
Using OmniBook Accessories

To replace the battery

The primary source of power for the OmniBook is its rechargeable battery. The
OmniBook provides several safeguards so that you won't be surprised by a
dead-battery condition—the status panel shows the remaining battery charge, the
battery symbol blinks when the battery is low, and a lightning bolt symbol appears
on the status panel when the battery is charging.
To preserve your current work session, the OmniBook automatically turns off when
the battery charge gets too low—your session continues when you plug in the ac
adapter or insert a fresh battery.
1. Important
Save your work. Then press the blue On/Suspend button to stop the OmniBook.
2. If available, plug in the OmniBook's ac adapter.
3. Slide the battery switch to the right and slide the battery out of its compartment.
4. Slide the new battery all the way into the battery compartment.
1-26