HP OmniBook 5700 Installation And Setup Manual page 6

To make DOS 6.22 and Windows for Workgroups disks ..........
To install Windows for Workgroups drivers ..................
Installing Windows NT or OS/2 Warp ........................
To install Windows NT or OS/2 Warp ......................
Installing HP Applications ................................
To install HP software programs ..........................
To read the online User's Guide ..........................
3. Expanding the OmniBook ...............................
Replacing Hardware ....................................
To remove the hard disk drive ...........................
To install the hard disk drive ............................
To find the system software version and memory size ...........
To add memory to the OmniBook ........................
Connecting Devices ....................................
To connect an external monitor ..........................
To adjust the display type ..............................
To turn off the built-in display ...........................
To connect a printer ..................................
To install a printer ....................................
To connect an external mouse or keyboard ..................
To connect both a mouse and keyboard ....................
To enable the FN keys .................................
To connect a serial device ..............................
To view or change serial port assignments ...................
To specify serial port settings ............................
To connect a parallel device ............................
To view or change parallel port assignments .................
To make an infrared connection .........................
To print on an infrared printer ...........................
To set up a PC card or parallel port CD-ROM drive .............
4. Changing the Configuration .............................
Changing the Configuration ...............................
Using HP User Tools ....................................
To run HP User Tools .................................
Using OmniBook Tools ..................................
To run OmniBook Tools ...............................
Using the System Configuration Utility ........................
To run the SCU (during reboot) ..........................
To run the SCU without rebooting ........................
Contents-2
2-7
2-9
2-10
2-10
2-11
2-11
2-12
3-1
3-3
3-3
3-4
3-4
3-6
3-8
3-9
3-9
3-10
3-10
3-10
3-11
3-11
3-12
3-12
3-13
3-13
3-15
3-15
3-16
3-16
3-17
4-1
4-3
4-4
4-4
4-6
4-6
4-8
4-8
4-8