floppy disk indicator
C A U T I O N
Using OmniBook Accessories
Installing and Removing Accessories
To insert and eject a floppy disk
When the OmniBook is reading or writing data to the floppy drive, the floppy disk
indicator appears on the Status Panel (above the function keys).
Do not insert or remove a floppy disk while the OmniBook is actively reading
or writing data. Wait until the floppy drive finishes reading. Otherwise, you
could lose data or the OmniBook could stop responding.
1. Hold the disk with its face up, then slide it into the floppy drive slot until it
clicks into place.
2. To remove the floppy disk, press the eject button on the front of the floppy disk
drive.
1-10