Figure 2-28. Intel Cpu Module Removal - HP Compaq Evo N1010v Series Service Manual

3. Depending on model configuration, an Intel or an AMD CPU module mey be installed. For models
using an AMD CPU, proceed to step 4. On models using an Intel CPU, proceed with the following
substeps:
a. Turn the lock screw one-half turn counterclockwise (you should here a light snap) to release
the CPU module ( see Figure 2-28).
b. Carefully lift the CPU module off the socket on the motherboard.
CAUTION: Each time you install a new CPU module, you must also replace the heat sink's
thermal pad to maintain optimum heat transfer. Use a sharp knife or scraper to carefully remove
the old thermal pad from the heat sink, and then attach the new thermal pad.
c. To install, carefullu insert the CPU module into the motherboard (the CPU module is
keyed for installation and can be inserted only one way).
d. Turn the lock screw one-half turn clockwise to secure the CPU module.
2-42 Removal and Replacement

Figure 2-28. Intel CPU Module Removal

HP Pavilion 4x00, HP Compaq nx9005 and nx9000,
Compaq Evo Notebook N1050v and N1010v,
and Compaq Presario 2100 and 1100 Models
Service Manual