Bios Setup Utility - HP Compaq Evo N1010v Series Service Manual

BIOS Setup Utility

The BIOS Setup utility provides access to the notebook's basic configuration settings It is independent
of the operating system
Running the BIOS Setup Utility
1. Close all applications, then restart the notebook: select Start > Turn Off Computer > Restart.
(If necessary, you can press
2. When the HP logo appears, press
3. The pointing devices are not active in BIOS Setup, so you will need to use the keyboard to navigate.
Press the
left
Press the and
up
Press or
F5 F6
a setting.
4. After you select the options you want, press
If the settings cause a conflict between devices during reboot, the system prompts you to run
BIOS Setup, and marks the conflicting settings.
NOTE: The listings in the following table are for the initial BIOS release and might differ somewhat for
other models
Service Manual
to restart.)
ctrl+alt+del
to enter the BIOS Setup utility.
F2
and arrow keys to move among menus.
right
arrow keys to move among parameters in a menu.
down
to move through values for the current parameter, or press
or use the Exit menu to exit BIOS Setup.
F10
Troubleshooting and Diagnostics
to change
enter
3-33