Table of Contents
Advertisement
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Tap [Call restrict].
4
Enter the base unit PIN and then tap [OK].
5
Turn on the checkbox for each handset that will be prevented from calling restricted phone
numbers and then tap [Next].
R To allow a handset to call restricted numbers, turn off its checkbox and then tap [Next] to
finish.
6
Select a memory location, enter the phone number to be restricted, and then tap [Done] at
the top of the screen.
ECO mode
You can reduce the amount of power that the base unit consumes by enabling ECO mode. This
feature reduces the transmission power of the base unit by up to 90% during standby mode.
1
Tap [Landline] in the home screen or app list.
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Turn the [ECO mode] checkbox on or off.
R
is displayed in the status bar when ECO mode is on.
Note:
R If [Repeater mode] is turned on (page 52), ECO mode is automatically turned off and the
[ECO mode] checkbox is not displayed.
R During standby mode, the transmission range of the base unit is reduced when ECO mode is
on.
R If there is another cordless phone in use nearby, the base unit transmission power may not be
reduced.
Phone number conversion codes
If you store phone numbers in your contacts using "+" and the country code, store the following
codes in the base unit so that phone numbers will be dialled correctly.
1
Tap [Landline] in the home screen or app list.
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Tap [Phone number conversion].
4
Select a code to edit, enter the code (4 digits max.) and then tap [OK].
– [International code]: This is the international dialling prefix that you need to dial when
dialling international phone numbers manually.
– [Country code]: This is the country code required when calling your country from
overseas.
– [National access code]: If you store domestic phone numbers in your handset using "+"
and the country code, this is the number that should replace the country code when
calling domestically.
Other Features and Settings
43
Advertisement
Table of Contents
