Omitting A Specific Area Code When Making Calls; Eco Mode - Panasonic KX-PRX150AZ Operating Instructions Manual

2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Tap [Call restrict].
4
Enter the base unit PIN and then tap [OK].
5
Turn on the checkbox for each handset that will be prevented from calling restricted phone
numbers and then tap [Next].
R To allow a handset to call restricted numbers, turn off its checkbox and then tap [Next] to
finish.
6
Select a memory location, enter the phone number to be restricted, and then tap [Done] at
the top of the screen.

Omitting a specific area code when making calls

You can specify an area code that will be omitted when making landline calls from the call logs,
contacts, etc. For example, if you specify the area code "09" and use the call log to call
"09-456-7890", the unit dials "456-7890".
1
Tap [Landline] in the home screen or app list.
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Tap [Area code].
4
Enter an area code (5 digits max.) and then tap [OK].
Note:
R For New Zealand:
The use of this feature can prevent a National Call from being dialled. E.g., in the case of the
South Island, the "03" will be omitted and will therefore prevent a National Call to other areas
of the South Island.

ECO mode

You can reduce the amount of power that the base unit consumes by enabling ECO mode. This
feature reduces the transmission power of the base unit by up to 90% during standby mode.
1
Tap [Landline] in the home screen or app list.
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Turn the [ECO mode] checkbox on or off.
R is displayed in the status bar when ECO mode is on.
Note:
R If [Repeater mode] is turned on (page 52), ECO mode is automatically turned off and the
[ECO mode] checkbox is not displayed.
R During standby mode, the transmission range of the base unit is reduced when ECO mode is
on.
R If there is another cordless phone in use nearby, the base unit transmission power may not be
reduced.
Other Features and Settings
43