Table of Contents
Advertisement
Expanding Your Phone System
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Tap [Cancel base unit].
4
Select the desired base unit number, and then tap [OK].
Adding a DECT repeater
You can increase the signal range of the base unit by registering a DECT repeater to the base
unit.
Important:
R See page 3 for information about the recommended DECT repeater. Your phone system may
not function properly if a different repeater model is used.
R Do not use more than one repeater at a time.
R If the repeater is already registered to a base unit, deregister it from that base unit before
adding it to another base unit. Refer to the documentation supplied with the repeater for details.
Registering a DECT repeater
1
Tap [Landline] in the home screen or app list.
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Turn on the [Repeater mode] checkbox.
4
Press and hold M
5
Connect the repeater's AC adaptor and then wait for the
green.
6
Press M
N on the base unit to exit registration mode.
Turning DECT repeater mode on and off
1
Tap [Landline] in the home screen or app list.
2
Tap [Landline settings] ® [Initial settings].
R The handset connects to the base unit.
3
Turn the [Repeater mode] checkbox on or off.
Using key finders
You can register up to 4 optional key finders to your phone system (page 3). By registering a key
finder to the base unit and then attaching the key finder to an easily misplaced item, such as your
house or car keys, you can use your handset to find the item. When you use the handset's key
finder search mode, the key finder will emit a sound that changes as the handset moves closer to
the item.
For more information, refer to the documentation supplied with your key finder or visit the
following web site.
http://panasonic.net/pcc/products/telephone/p/tga20/
52
N on the base unit for about 5 seconds.
and
indicators to light in
Advertisement
Table of Contents
